Košík je prázdny
Magigoo Pro PPGF - Adhesive for Glass Reinforced Polypropylene
Magigoo Pro PPGF is designed to work exclusively with Glass Filled Polypropylene type filaments. This adhesive for professional use, makes sure prints stick firmly when the print-bed is hot and that the part is easy to remove once it cools. This unique and innovative mechanism means that no tools are needed to remove prints from the bed. They just pop off when the bed cools down.
35,95 €
(29,23 € bez DPH)
Nie je skladom
Tento produkt je momentálne na objednávku. Ak máte oň záujem, dajte nám vedieť a my ho doskladnime skôr. Predpokladaný termín dodania pri produktoch ktorí nie sú na sklade je medzi 7 a 14 dní.
Magigoo Pro PPGF - Adhesive for Glass Reinforced Polypropylene
Magigoo Pro PPGF is designed to work exclusively with Glass Filled Polypropylene type filaments. This adhesive for professional use, makes sure prints stick firmly when the print-bed is hot and that the part is easy to remove once it cools. This unique and innovative mechanism means that no tools are needed to remove prints from the bed. They just pop off when the bed cools down.
Why Magigoo Pro PPGF?Magigoo® Pro - Glass-filled Polypropylene, acts as a thermally activated inter-facial layer, allowing for better interactions, both at the micro and molecular level, between the printing bed and the printed material. It is generally recommended to print according to the printing temperatures recommended by the filament supplier. Printing conditions vary between one printer and another.
To find the best temperature one could start from the lower end of the recommended settings and increase the bed temperature in 5 °C increments. This should be done with standardized calibration prints...
An additional benefit of Magigoo® Pro - Glass-filled Polypropylene, being thermally activated, is that it will release the print upon cooling. Again, different printers, print surfaces, or filaments will have slightly different release conditions but as a general rule, a reduction in the temperature of 30-40 °C will be sufficient to remove your prints without any effort.
The best and most reliable performance is achieved when applied as a thin layer. This means that cleaning and re-applying between prints is recommended especially on longer prints or hard to print with materials.