Nylon FX256 | Fillamentum
This advanced high-tech material made from polyamide 12 retains its excellent mechanical properties under a wide range of temperatures (-40 up to 140°C!). It has a remarkable interlayer adhesion and keeps quite flexible properties in thin layers. It is a good choice for printing functional and technical items because of its low friction coefficient and exceptional thermal resistance. It's a tough material that can withstand a variety of chemicals, including automotive fluids. It has been approved for use in food contact applications. Thanks to its electrical insulation qualities, it can be used as an electrical connector, unraveling another field of application.
Technické informácie
Tepelné vlastnosti | |
HDT-A | 50 °C |
HDT-B | 110 °C |
Teplota mäknutia Vicat (VST) | 140 °C |
Nastavenia sušenia | 80 °C po dobu 3 h |
Vlastnosti filamentu | |
Krajina pôvodu | Czechia |
Hustota | 1.01 g/mm3 |
Tolerancia priemeru | 0.05 mm |
Hmotnosť a rozmery cievky | |
Dĺžka filamentu | 308 m |
Ako skladovať filamenty?
Vlhkosť a UV žiarenie môžu časom znížiť kvalitu filamentov a oslabiť ich mechanické vlastnosti. Odporúčame skladovať otvorené filamenty na suchom a tmavom mieste. Kompletný návod ako správne skladovať filamenty nájdete tu.
Kde vyhodiť nepodarky a supporty?
Prosíme našich zákazníkov, aby s plastovým odpadom nakladali zodpovedne. Nepodarené výtlačky, podporný materiál, raft či brim by mali byť zlikvidované podľa miestnych smerníc. Paradoxne, vo väčšine prípadov je lepšie tento odpad vyhodiť do bežného odpadkového koša, pretože väčšina odpadu z 3D tlače nie je identifikovaný, čo spôsobuje v zariadeniach na triedenie odpadu viac problémov ako úžitku.
Nylon FX256 | Fillamentum
This advanced high-tech material made from polyamide 12 retains its excellent mechanical properties under a wide range of temperatures (-40 up to 140°C!). It has a remarkable interlayer adhesion and keeps quite flexible properties in thin layers. It is a good choice for printing functional and technical items because of its low friction coefficient and exceptional thermal resistance. It's a tough material that can withstand a variety of chemicals, including automotive fluids. It has been approved for use in food contact applications. Thanks to its electrical insulation qualities, it can be used as an electrical connector, unraveling another field of application.
The easiest way to print Nylon is by using an adequate bed material or an appropriate adhesive. Please see the recommendation below.
Features:
- Incredibly durable and versatile
- Wear resistance
- Lower moisture absorption compared to other types of polyamide
- Good dimensional stability
- Safe for food contact applications according to EU regulation (not for Traffic Black color)
- Safe for food contact applications according to U.S. FDA regulation (only color version "Natural")
- Safe to use in electrical and electronic equipment
- Possibility of sterilization in an autoclave
Všeobecné informácie o Nylon :
PA (polyamide) describes a group of polymers with an amide repeat unit. Generally in the FDM industry, there are 3 main types of PA which include PA12, PA66, and PA6.
Sometimes these materials can be either grafted with other polymers or else reinforced with glass or carbon fibers. Generally, nylons exhibit high strength, toughness, elasticity, wear resistance, chemical resistance, and thermal resistance and are widely sought in various industrial applications.
Nylon filaments prove to be challenging materials for FDM printing due to their lower
adhesion to conventional 3D-printing build surfaces and their higher tendency to warp.
Furthermore, there are several classes of PA filaments each behaving differently.
Fillamentum je síce česká značka, ale ich filamenty pozná celý svet. Od nádherných farebných PLA odtieňov po priemyselný Nylon posilnený karbónovými vláknami; s Fillamentum je voľba ťažká. Toľko dobrých filamentov.. Ich filamenty nájdete na priehľadných cievkach od 0,5kg po 2.5kg.
Fillamentum v súčasnosti exportuje svoje produkty do viac ako 62 krajín po celom svete a má viac ako 15-ročné skúsenosti v priemysle spracovania plastov.